GGB DX / DX10
GGB DX / DX10 is part of the GGB range of metal-polymer (ptfe) composite plain bearings — with engineered-plastic (solid polymer), fibre-reinforced filament-wound composite, and self-lubricating metal/bronze families. POM-lined, marginally/greased-lubricated metal-polymer for higher loads and shock — closest to Bushingo BP25 in greased or oil-impregnated sintered-bronze duties, and a hard-wearing upgrade where a sintered bronze bush would edge-load. Cross-referenced with Kolbenschmidt Permaglide P14/P2 and similar acetal-lined metal-polymer bushes.
Specification
| Brand | GGB |
|---|---|
| Series | GGB DX / DX10 |
| Material | Metal-polymer with an acetal (POM) sliding layer featuring lubricant-retaining indentations, bonded to a steel/bronze backing — designed for marginally lubricated (greased/oiled) service |
| Forms | Cylindrical bush, Flanged bush, Thrust washer |
| Typical size range | Comparable to DU — typically small bores up to around 100+ mm; general/typical guidance only, exact sizes confirmed per quote. |
Key features
- POM sliding surface with dimples that retain lubricant
- Higher load capacity for greased/marginally lubricated duties
- Strong resistance to edge loading and shock
- Good wear resistance and long relubrication intervals
- Robust in contaminated or dirty environments
Typical applications
- Automotive chassis and suspension components
- Hydraulic gear pumps
- Agricultural and off-highway machinery
- Construction and earthmoving pivots
- General greased oscillating joints
Bushingo cross-reference
POM-lined, marginally/greased-lubricated metal-polymer for higher loads and shock — closest to Bushingo BP25 in greased or oil-impregnated sintered-bronze duties, and a hard-wearing upgrade where a sintered bronze bush would edge-load. Cross-referenced with Kolbenschmidt Permaglide P14/P2 and similar acetal-lined metal-polymer bushes.
See the full cross-reference table to match this to the Bushingo/Metafram range and other brands.
Request a quote for GGB DX / DX10
Send your bore/OD/length, load, speed and temperature — or a competitor part number — for a quoted equivalent.
Request a quote ↗